AISI 4130 Pipes


We stocks all AISI 4130 Pipes, 4130 Tubing, 4130 Flanges, 4130 Pipes Fittings, 4130 Elbow etc. The carbon content is nominally 0.30% and. with this relatively low carbon content the alloy is excellent from the fusion weldability stand.point. The alloy can be hardened by heat treatment.

AISI 4130 Pipes Specification

Product Name:AISI 4130 Pipes
We accept all small/large quantity orders.

Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end

Inspection: Strictly according to the stand.ard requirements and. offer the original MTC (EN10204.3.1/3.1B)

Relevant Test: ASTM A519-Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test, Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test, magnetic particle testing

Manufacture methods: Cold Finished method or hot finished Method.

Applications: Automobile and. Bearing Industry, Mechanical and. Structral Purpose, Hydraulic and. Petrochemical Purpose, etc.

AISI 4130 Pipes Packaging & Shipping

Packing: Plastic plugs in both ends, bundles of max. 3,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper and. sackcloth with several steel strips

Delivery Condition: Annealed (A), Bright Annealing, Normalized (N), Stress Relief Or Finish Anneal (SR), Quenched and. Tempered (Q+T), etc.

Marking: All tubes are eddy current tested and. are marked with size, cast number and. specification. Or as per customer’s requirement;

Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc;

AISI 4130 Pipes Inner packing:

Caps on two ends of every pipe

AISI 4130 Pipes Outer packing:

Hexagonal shape bundles wrapped with strong steel trip or according to customers’requests.

So, besides the fact that we can arrange freight transportation for you, we can before that:

Specifically mark parts or packages:

Provide for a special packing according to what is required by the shipping method or by you.

We mark the AISI 4130 Pipes as needed with the most suitable marking technique.

When packaging and. packing, our experienced warehouse staff systematically takes the greatest precautions for your AISI 4130 Pipes to be optimally protected during transportation. We pack the AISI 4130 Pipes according to the appropriate method: strapped pallet, wooden crate, overseas packing (ISPM15).

Leave a Comment